How To Install Window Blinds In Boston

Many Boston homeowners choose window blinds when they want more privacy and management over daylight in their properties. They’re a functional and cost-effective window treatment. They also require just a couple of steps to place for capable do-it-yourselfers. But, nothing is better than choosing an expert window treatment installer. Here are the essential steps of installing window blinds and when you should contact the pros to complete it for you.

Take Precise Measurements

Prior to beginning, figure out if you want inside-mount or outside-mount blinds. This vital bit of info will tell you where to measure. Get measurements of the depth, height, and width inside your window frame for inside-mount blinds. When attaching outside-mount blinds, measure the width and height of your window, including the trim, and add three inches to your measurements to make sure you have proper coverage. Measure precisely–refrain from rounding up or down. Poorly fitting blinds will not operate satisfactorily.

Order Your Blinds

Once you get your measurements, you may choose your blinds. You probably know what type of blinds you would like. Buy blinds that are as even with your measurements as possible. Ready-made blinds might not fit exactly, either extending out too far or not meeting the end of the window properly. Ensure you are provided equipment that permit you to install the blinds at the proper depth, also. You’ll need to choose custom-made blinds and parts for a perfect fit.

Install Your Blinds

Your blinds should come with instructions. Use them to affix your exact product. If you want a glimpse of how difficult it is to install window blinds in Boston, here are several basic steps to provide a general idea.

 

Inside Mount Blinds

 

1. Put a bracket at the top of the window’s frame about an inch from the outer edge. Check that this spot won’t obstruct the blind’s operation. Use a pencil to indicate the bracket holes.
2. Drill pilot holes on your marks.
3. Line up the bracket holes with your pilot holes and secure with screws.
4. Repeat these initial three steps for the next bracket.
5. Snap the end caps onto the top rail of your blinds. Position the headrail into the brackets.

Attach the tilt wand and check it. In addition, test the pull cord.

Outside Mount Blinds

1. Decide if you’re installing on the window trim or wall around the window. Hold the headrail in place and make sure the blind covers the bottom edge of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from both headrail marks and mark holes for the brackets.
4. Drill pilot holes in the proper spots.
5. Line up the bracket openings with your wall holes and attach with screws at each end.
6. Fit the blind rail into the brackets.

Attach the tilt wand and try out everything to ensure it works.

Choose The Simplest Way To Install Blinds 

Of course, you aren’t required to do blinds by yourself. The easiest way to install window blinds in Boston is to seek out a professional window treatment installer. They will work with you every step of the way. They’ll help you pick blinds that accommodate your needs and preferences, make precise measurements for a custom-made product, and install them for you. They support customers every day, so they’ll complete your project swiftly and precisely. They will diagnose any concerns without wasting hours looking for help on websites. A window treatment expert will also offer higher-quality blinds than online or box stores.

Save Yourself The Trouble And Have Sunburst Shutters Install Your Window Blinds In Boston

Getting new window blinds in Boston couldn’t be easier when you work with Sunburst Shutters Boston. We’ll help you choose made-to-order blinds that will suit your windows perfectly, and our professional installation team will attach them for you. All you have to do is dial 781-352-2205 or fill out the form on this page to schedule a free in-home consultation.